# EPOXY CONDUCTING PRIMER RAINBOW PAINTS ## Product Code No.1098W ## Type Two-component water-based conductive primer composed of waterborne epoxy resin, hardener, special conductive fillers and additives. ## Application Water-based conductive floor primer for electronic tech factories, wafer processing plants, cleanrooms, laboratories, hospital biotech areas, precision instrument rooms, computer rooms, powder processing plants, textile mills, solvent storage warehouses and ammunition depots. ## Properties 1. Water-based low-VOC formula, suitable for construction in indoor and enclosed spaces 2. Excellent electrical conductivity to effectively eliminate static electricity ## Specification Data - Color: Black - Specific Gravity: ≥1.0 Kg/L (mixed paint) - Viscosity: 80~105 KU (mixed paint at 25°C) - Drying Time - Tack-free: Within 2 hours - Hard dry: Within 10 hours - Full cure: 7 days (25°C) - Film Thickness: Wet film 300 μm, Dry film 100 μm - Theoretical Coverage: 12.5 ㎡/Gal, 3.3 ㎡/L, 3.3 ㎡/Kg - Recoating Interval: Minimum 14 hours (25°C) - Mix Ratio: Base : Hardener = 33.3 : 66.7 (by weight) - Pot Life: Within 1 hour (mixed paint at 25°C) - Thinner: Tap Water - Thinner Dosage: 0~5% (excluding tool cleaning) - Non-Volatile Content: Over 35% (mixed paint) - Storage Stability: Minimum 1 year under normal storage ## Application Methods Spray Coating, Brush Coating, Roller Coating ## Construction Precautions ⚠️ 1. Thoroughly remove all surface contaminants including moisture, grease, sludge and dust from substrates. 2. Mix base and hardener in specified ratio uniformly before use. 3. Avoid construction on rainy days or when ambient relative humidity exceeds 85%RH. 4. Clean all coating equipment immediately after use.