# WATER-BASED CEMENT COATING FOR ENGINEERING RAINBOW PAINTS ## Product Code No.1000 ## Product Title MAT EMULSION PAINTS ## Type Matte water-based cement coating refined from waterborne resin with outstanding water and alkali resistance, matched with hiding pigments and functional additives. ## Application Protective and decorative topcoat for interior structures including office buildings, tourist hotels, public venues, hospitals, retail shops, residences, cement, brickwork and gypsum substrates for engineering projects. ## Properties 1. Uses clean water as solvent, non-toxic, odor-free, low VOC and non-flammable 2. Tap water serves as diluent, greatly reducing construction costs 3. Delicate micro-matte appearance; tough coating film with soft elegant look and easy cleaning 4. Excellent water resistance and alkali resistance ## Specification Data - Gloss: Matte - Color: White - Hiding Power: ≥7 ㎡/L - Specific Gravity: ≥1.35 kg/L - Viscosity: 80~110 KU (25°C) - Drying Time - Surface dry: Within 0.5 hour - Hard dry: Within 2 hours (25°C) - Recoating Interval: Minimum 3 hours - Film Thickness: Wet film 100 μ, Dry film 35 μ - Theoretical Coverage: 10.0 ㎡/L, 7.4 ㎡/kg - Volume Solids: 35% - Thinner: Tap Water - Thinner Dosage: 5~10% - Compatible Primer: No.410-2 Alkali-Resistant Sealing Primer - Storage Stability: Minimum 3 years when stored in cool, dry place above 0°C ## Application Methods Brush Coating, Spray Coating, Roller Coating ## Construction Precautions ⚠️ 1. Stir thoroughly before use. Dilute with tap water if the paint is too thick; do not exceed the specified dilution ratio. 2. Fully remove grease, dust and other contaminants from substrate surfaces before construction. 3. Use Rainbow water-based colorants for tinting. 4. Fresh cement walls contain excessive moisture and free alkaline substances which will degrade film performance and adhesion. Allow 2~3 weeks for full drying until moisture content drops below 12% prior to coating. 5. Construction Conditions: Ambient relative humidity below 85%RH, temperature ≥10°C. ## Note All data provided in this product datasheet are derived from internal laboratory tests for construction design reference only. Actual performance varies subject to different construction environments. This document does not constitute any legally binding warranty or statement from the manufacturer. Contact our technical department for clarification of any uncertainties.